This section of the LEGO Star Wars Skywalker Saga guide provides a complete walkthrough of the Droid Factory Frenzy level from Attack of the Clones Episode 2.
On this page, you will find the second part of the Episode 2 walkthrough (Attack of the Clones). The walkthrough covers the Droid Factory Frenzy level and the related tasks, including how to get to the droid factory, how to control Anakin and C-3PO in the factory, and how to save Padme.
- Nightmares
- Tusken Raid
- Distress Signal
- Droid Factory Frenzy – challenges
- Droid Factory Frenzy – walkthrough
Nightmares
After completing the story mission of chasing Jango’s Starship, you will return to Theed and receive the task of visiting Anakin’s mother. Reach the pad and select Tatooine from the galaxy map. You need to go to Mos Espa on the planet’s surface.
After landing, go to the building in front of which there is a blue circle that activates the conversation with Watto. To continue the search, you need to travel to the Jundland Wastes, and you can use the parked vehicle marked by the game. In the new place, reach the farm where you will meet C-3PO.
Tusken Raid
You need to go to the Tusken Raider camp marked by the game, which is in a nearby canyon. You will find a new blue circle there, and examining it will trigger a cutscene.
Distress Signal
Your task is to save Obi-Wan, which means you need to fly to the planet Geonosis. You don’t need to open the galaxy map because you can fly to the marker that will take you to Geonosis Space.
There is a landing site on the planet’s surface (Stalgasin Hive).
After reaching the surface, go to the droid factory. If necessary, climb or jump to the next protruding edges along the way.
In the place shown in the picture, you have to use the Force several times – to unlock the catches and raise the hatch. Jump into the small hole. You will find a blue circle that starts the Droid Factory Frenzy level.
Droid Factory Frenzy – challenges
This level has three challenges:
- Save Padme Quickly – You must rescue Padme within 30 seconds. This task is the final part of the mission, and you don’t need to perform any special actions other than reaching her quickly. Our walkthrough provides a detailed description of how to save Padme.
- Use Mind Control – You need to turn Geonosians against each other using the Force. This challenge requires you to use mind control while playing as Anakin. Continue playing the mission until you encounter enemies on the conveyor belt. Use mind control on one of them (hold Triangle/Y on the pad) and choose panic from the available actions. By attacking his ally, a panicked opponent can complete this challenge.
- Find a Shortcut – You need to discover a shortcut above the conveyor belt. Advance in the mission until Anakin’s team begins moving to the left on the first conveyor belt. Reach the press machine shown in picture 1, and instead of running under it, jump on it.
- Climb to the top of the machine. You will reach the hanging rope shown in picture 2. By grabbing it, you can take a long descent, avoiding a large part of the second conveyor belt.
Walkthrough for Droid Factory Frenzy
During the mission in the droid factory, you control two groups of heroes and switch between them to help the other group make progress.
You start by controlling Anakin and Padme’s team. Deal with a group of flying enemies using a blaster or throw the lightsaber (R2, RT, or LMB) based on your preference. It is also helpful to hide behind covers.
After successfully defending, C-3PO and R2-D2 appear. Focus on them because you need to help Anakin and Padme unblock the passage. Destroy nearby objects and use them to construct a bridge to the central circular platform.
Now you need to build in another area, creating a blue terminal this time. Interact with it as R2-D2 and solve the puzzle involving rotating the rings.
The energy source above the blue terminal will be activated, but the second one requires charging. Select Anakin’s team again. Use the Force (F on PC, triangle on PS, Y on Xbox) on the inactive object shown in picture 1.
Move the grabbed object to the right using the Force and keep it next to the charged one (picture 2). Wait for the second energy source to charge and put it back into the left slot. You will unlock the exit, and Anakin’s team will be able to jump onto the first conveyor belt.
Head left and avoid getting crushed by the working machines. Stop at each one and wait until you can safely run farther left.
Once you reach the end of the first conveyor belt, you have two options. You can either jump onto the next conveyor belt or climb up to a location where you can slide down a rope. The latter option is part of the Zipping Past Danger challenge, which we explained in detail in the previous section.
Both paths will lead to a blocked passage, and you’ll need to switch to the C-3PO team. Once you’ve crossed the narrow beam again, use the opening to jump onto the new conveyor belt.
Continue through the conveyor belt and reach the location shown in the picture. Here, you’ll need to jump into a container filled with bricks and then quickly jump to the nearby ledge.
Break the barricade between the force fields and explore the newly unlocked area. Destroy nearby objects and build a yellow terminal that C-3PO can use (picture 1).
Interact with the terminal and choose the option to control the turret. Use it to shoot and destroy the golden blockade from picture 2.
Select R2-D2 and interact with the blue terminal. Complete the mini-game to trigger the cutscene of moving the platform.
Now switch to Anakin’s team. Climb up the metal objects covering the furnace to reach the higher level.
As Anakin, approach the wall next to the new conveyor belt shown in the picture and use a lightsaber to destroy it. This will allow Padme to create a terminal. Use it and complete the mini-game by pressing the buttons on the screen.
Next, you’ll have to fight droids. You can use a lightsaber or blaster to destroy them.
Further along, you’ll encounter Geonosians. As Anakin, you can use mind control (F on PC, triangle on PS, Y on Xbox) to make them panic and unlock the Mind Control Drone challenge.
Continue the journey and slide down the rope. Use the build option and pull the two levers at the same time, with Anakin and Padme on separate levers.
Padme will be kidnapped, and you’ll need to save her. Switch to R2-D2 and head towards the marker indicating her location. At the location shown in the picture, use the upper grappling to jump over the abyss and land safely on the new ledge.
To save Padme, interact with the blue terminal. If you want to complete the No Hanging Around challenge, quickly complete the mini-game of matching the rings. A new cutscene will trigger, and you’ll complete the level.
FAQ
1. What is LEGO Skywalker Saga: Droid Factory Frenzy?
LEGO Skywalker Saga: Droid Factory Frenzy is a video game that is part of the LEGO Star Wars franchise. It is a puzzle game where you play as a droid navigating through a factory, completing various tasks and avoiding obstacles along the way. The game features familiar characters and settings from the Star Wars universe, and is designed to be fun and challenging for all ages.
2. How do I play LEGO Skywalker Saga: Droid Factory Frenzy?
To play LEGO Skywalker Saga: Droid Factory Frenzy, you’ll need to download the game onto your device. Once installed, simply follow the on-screen instructions to start playing. The game is controlled using touch gestures, and you’ll need to tap, swipe and drag to move your droid around the factory. The game features a variety of different puzzles and challenges, so be sure to explore each level thoroughly to complete all of the tasks.
3. What are some tips for playing LEGO Skywalker Saga: Droid Factory Frenzy?
One of the best tips for playing LEGO Skywalker Saga: Droid Factory Frenzy is to take your time and explore each level thoroughly. There are often hidden paths and secret areas that can help you complete tasks more quickly, so be sure to look around carefully. Another tip is to use your droid’s special abilities to your advantage. For example, some droids can fly, while others can shoot lasers. Using these abilities strategically can help you overcome obstacles and complete tasks more easily.
4. How many levels are in LEGO Skywalker Saga: Droid Factory Frenzy?
LEGO Skywalker Saga: Droid Factory Frenzy features a total of 20 levels, each with its own unique challenges and puzzles to solve. As you progress through the game, the levels become more difficult and the puzzles more complex, so be prepared for a challenge. However, with patience and persistence, you can complete all 20 levels and become a master of the droid factory!
James, a young and enthusiastic gamer. With a passion for gaming, he personally plays and experiences the games he writes about, providing authentic and insightful content to fellow gamers.